jlas1 Klicky-Probe issues

jlas1 / Klicky-Probe

Microswitch probe with magnetic attachement, primarily aimed at CoreXY 3d printers

GNU General Public License v3.0

1.21k stars 281 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Switchwire Servo movement on Extruder movement

#264 Nachbar76 opened 1 week ago
0
Lasted update to Klicky macros causes an edge case where the toolhead can crash

#263 jmeier5261 opened 2 weeks ago
1
Fix an issue where toolhead can crash on repeat homing because safe_z is being blindly overwritten with current z position

#262 jmeier5261 opened 1 month ago
1
Actuate servo at safe z height

#261 thetic opened 1 month ago
0
Probe_Lock will not working what so ever

#260 DragonFlyer007 opened 1 month ago
0
Dock QGL and Home

#259 MattiaFontanaErrepinet opened 1 month ago
0
Klicky macros not probing Z at the center of the bed

#258 hamster65 opened 2 months ago
0
Avoid excess docking between z-tilt-adjust and rehoming z axis

#257 MartijnGevaert opened 2 months ago
0
Klipper Macros and Sensorless Homing

#256 seanmccully opened 2 months ago
2
long stl and suggest config

#255 tjengbudi opened 3 months ago
0
Klack Probe macros for the Ender 3 (dock height changes on me) Neptune 4 plus

#254 KA009onPC opened 3 months ago
0
Step files for Docks

#253 BenJBachler opened 3 months ago
1
Servo dock moves while docking probe

#252 gixxerfool closed 3 months ago
1
voron v0 revo cowling.... need orbiter 2.0 variant with the revo

#251 Braincell1973 opened 3 months ago
0
Error evaluating 'gcode_macro _User_Variables:gcode': jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'x_offset'

#250 blackmikeee opened 3 months ago
1
Fix goint typo (replace with going)

#249 thunderkeys opened 3 months ago
0
Not attaching probe on G28 Z from mainsail after recent updates

#248 53Aries opened 3 months ago
10
how can one adjust the speed of the lift of plate when doing z-tilt

#247 drumstick77 opened 3 months ago
0
is it possible for probe to stay undock on toolhead after homing all axis?

#246 drumstick77 opened 3 months ago
4
the use of klicky probe when doing AXIS_TWIST_COMPENSATION_CALIBRATE

#245 drumstick77 opened 3 months ago
0
Adding missing [% %} to line 655

#244 iamnotahippy closed 4 months ago
1
Change macros to support minimum_cruise_ratio instead of max_accel_to_decel

#243 Senorgif2 closed 4 months ago
5
Retract dock after an extra move away

#242 truelecter opened 4 months ago
0
UnklickyNG doesn't work with 2.7mm magnets

#241 ressu opened 4 months ago
0
Add support for slideswipe and similar probes

#240 HitLuca opened 4 months ago
1
Documentation

#239 shkup opened 5 months ago
1
FR Keep probe docked for all of start print sequence

#238 gixxerfool closed 6 months ago
1
KlickyNG for Voron V0.2r1 niggles

#237 bozzzzo opened 6 months ago
0
Homing Issue with Macros

#236 danilosousadba opened 6 months ago
1
Please make a better instruction for the macro settings, or where to find instructions

#235 Hoeby opened 6 months ago
0
Edge case where the probe crashes into dock

#234 propeller3D opened 6 months ago
0
Fixed Climbing Z when homing. New variable added. Made new probe check macro for systems using conditional homing

#233 3DPrintDemon opened 7 months ago
0
Homing issues

#232 v0nsild opened 7 months ago
0
Dock if probe is already connected before homing z

#231 dderg opened 7 months ago
1
Certain Events & Probing Error Leaves Potential For Starting Next Print With Probe Still Attached & Unchecked

#230 3DPrintDemon opened 8 months ago
0
Out of Range Issue when homing.

#229 DIY-75 opened 8 months ago
0
Servo angle rounded up when docking?

#228 feaver12 opened 8 months ago
0
Existing command 'BED_MESH_CALIBRATE' not found in gcode_macro rename

#227 stefi01 opened 8 months ago
1
Expand for rapido uhf

#226 Bersaker opened 9 months ago
2
Sensorless homing-variable_homing_current inconsistently applied

#225 53Aries opened 9 months ago
0
Probe Head crashes into Probe holder

#224 MCCatboy opened 9 months ago
1
Voron V0 Fan can not be installed Skeeter_Cowling_wKlicky_.stl

#223 freakezoid1604 closed 9 months ago
2
Klicky causing Y to not home

#222 53Aries opened 10 months ago
2
Voron v0 long probe not working

#221 mkomuc opened 10 months ago
1
FR Multi Probe, additional heights and speeds

#220 Avatarsia opened 10 months ago
0
Fix: Update README.md (missing link)

#219 TeaRex-coder closed 3 months ago
0
Simple Guide fro Voron Trident

#218 pasha4ur opened 11 months ago
1
Something in my klicky macros is creating a MCU unable to connect issue.

#217 bcharle10 closed 10 months ago
3
KlickyProbe_AB_mount_v2 is missing appropriate pressfit holder

#216 WizardUli opened 11 months ago
2
Correct suggested stripped wire length to match provided picture

#215 thunderkeys opened 11 months ago
0