-
Hello,
I am trying to emulate the exact UC2-Hi2 microscope you made to integrate into an opentrons system. I have purchased all the parts required for this and I am having trouble connecting them. …
-
Hello,
This is just for discussion. I ran across this [1 W engraver](https://fr.aliexpress.com/item/1000mW-Automatic-DIY-Laser-Engraving-Machine-Carving-Engraver-Carver-AC100-240V-Miniature-DIY-Han…
-
I have a NEJE 20W laser installed on a quick release for my Ender-3V2 printer.
I started testing and using your LaserWeb application but couldn't find a feature to allow for the laser to drop in …
-
Engraver makes some noises and moves when I press "upload" but when I then press "start" or any other button, nothing happens :S
Is this a software problem?
-
-
Hi Lee,
First I wanted to thank you for your extension, I used it over a year, and made great project.
It was perfect for my NEJE desktop laser engraver
Unfortunately after i installed another ext…
-
hi . i build a laser machine with **80w 24v diode laser**( twotree brand) and buy **mks dlc32 v2** board for control this laser head. and update mks firmware to lasetes V2.30_H35_2022_1223_N_ZX_001 (…
-
Hi All, I use a Neje Master 2 laser with a 30W head. I run GRBL 1.1f on the 8bit board and the laser has a bed that is 170mm x 170mm in size. I believe I am running into some limit but I am unable to…
-
Hi! First of all, I would like to congratulate you for this amazing work! Despite the fact your software is the only one I can use to run this cheap engraver on Mac, it certainly is much better than t…
-
### Wiki Search Terms
Edit yaml file with website
### Controller Board
DLC MKS 32 V2.1
### Machine Description
Laser corexy Neje 30w
### Input Circuits
_No response_
### Configuration file
``…
FMD14 updated
4 weeks ago