-
The flatpak build seems to run commands twice.
For instance, it is running the NMEA0183 library link twice. This is most obvious when the `cmake` build system is changed to `cmake-ninja` in `flatp…
-
Two approaches:
1. Connected to your ships instruments with OpenCPN running receiving Nmea0183 data.
2. On land using VDR_pi and recorded nmea0183 data files.
Process
1. Start Opencpn, load …
-
**Description**
If there is no msg files `get_interface_path` will return an idl path. This is then fed into the `parse_message_string` function for msg files. This ends up with a lot of errors spa…
-
Some WWAN modems with built-in GNSS require that the magic string `$GPS_START` is sent to the serial device which is used for NMEA0183, only then data will start to arrive on that port.
It would be g…
-
### Introduction
At https://github.com/maritime-labs/calypso-anemometer/issues/12#issuecomment-1444161597, @UserMacUseface shared a pointer to NMEA0183 XDR sentences [^1], which can be used to transm…
-
I have I2C connected humidity/temp/pressure sensor (BME860) to get data into SignalK and out again to the NMEA0183 network. I have the signalk-raspberry-pi-bme860 plugin and that brings data into Sig…
-
Currently when you parse an NMEA0183 message (tNMEA0183Msg::SetMessage) there is no check against the field count.
So if the message (accidently) contains more then 20 fields it will overwrite data l…
-
`NMEA0183ParseROT_nc` and `NMEA0183SetROT` deliver/expect radians as angle unit. But the change rate is still per minute. I think this should be converted to 1/s to keep in line with SI and what NMEA2…
-
It should be pretty easy to protect the users from common nonsense in the configuration, for example TCP and Signal K endpoints must not have broadcast or multicast addresses like 0.0.0.0
Also the …
nohal updated
2 months ago
-
## Security Priority
- [ ] This is a report related to [Security](github.com/canne/dashboard_tactics_ptyi/security)
## Installation checklist
I have installed the software for wh…