-
I am trying to build the `product-mini/platforms/zephyr/simple` example targeting the `nucleo_f767zi` board with `WAMR_BUILD_LIBC_WASI` so that a WASM module compiled for `wasi` can execute on the boa…
-
I'm on Fedora 38 and I'm trying to build for the NUCLEO_F767ZI board. On a fresh clone of the repository I ran the command
`python3 make.py stm32 submodules clean mpy_cross BOARD=NUCLEO_F767ZI`
…
-
There seems to be some issue with the examples/timer implementations.
attempting to run the timer example on a stock nucleo-f767zi board prints the message in main but TIM2 never fires.
-
#### Description
The stm32f746 and stm32f767 are almost identical, only different peripherals and a different cache size, and one would expect at least somewhat identical benchmark results between …
-
VS Code **launch.json** config file generated using **mbed export -i vscode_gcc_arm**, e.g.
`mbed export -i vscode_gcc_arm --target NUCLEO_F767ZI --profile debug`
uses depreciated pyOCD commands…
-
The various general-purpose timers in the silicon can be used for dozens of purposes.
Create an interface that easily exposes the ability to drive a PWM signal or measure pulses via the input captu…
-
Hi,
I started to do some test with my Nucleo-144 F767ZI board using STM32 MCU. I want to try to port the CS-EX to STM32.
I was able to replicate the old DCC++ PWM overflow IRQ to change the freque…
-
I am getting this error when i try to connect my STM32L0 discovery board
Log:
Searching Device...
ST Link V2 / Nucleo not found or unable to access it.
Did you install the udev rules ?
USB erro…
-
#### Description
I have access to two STM32 Nucleo boards (nucleo-f303ze and nucleo-f767zi) both do not have their external crystals populated (X3). Instead the HSE is provided by the on board stli…
-
| Name | Display | IRsend | GPIO | shake sensor |
| --- | --- | --- | --- | --- |
| ST Nucleo F767ZI / H723ZG | :heavy_check_mark: (ssd1306 and ILI9341) | :question: | :heavy_check_mark: |
| Feathe…