-
Hi there!
Need a little help wit SSD1306 (0x3C) display.
Getting no picture with your code.
This code works from arduino ide example:
```
#include
#include
#include
#include
#defi…
-
I was searcing a menu code for my project and found this interesting for me. Tried compile with arduino ide 1.8.11, for ESP32 DevModule, but got error message:
enumeration value 'off' not handled in …
-
### Current Situation
I've gotten OOK_Receiver running, but I wondered if anyone has added display output? Essentially, it would be easier to demonstrate the program if the display showed activity.
…
-
Hi all,
I got IDF v5.2 (master) & [LVGL 8.3.7](https://github.com/lvgl/lvgl/commit/2b56e04205481daa6575bd5f7ab5df59d11676eb) to compile.
See https://github.com/hiruna/lvgl_esp32_drivers/tree/dev…
-
Instead of the lines:
```
// create display device
#define OLED_RESET -1 // unused port - to keep the compiler happy
Adafruit_SSD1306 display(OLED_RESET);
```
I needed to put in the followi…
-
Occasionally after flashing (either via sysex or via the SD bootloader) the OLED column pointer ends up somewhere offset and the whole display is aligned. In principle the `0x22` and `0x20` commands s…
-
products,
https://www.seeedstudio.com/Seeeduino-XIAO-Expansion-board-p-4746.html
https://www.seeedstudio.com/Grove-OLED-Display-0-96.html
![IMG_6331](https://github.com/olikraus/u8g2/assets/15…
-
I try to build OpenTama with SSD1306 0.96" , i edited in board_opentama.h i uncommented line #define BOARD_HAS_SSD1306 and commented //#define BOARD_HAS_UC1701X , build and flashed but OLED is blank …
-
hello there is no define.h file in esp compilation
and I have errors:
Arduino:1.8.12 (Mac OS X), Płytka:"Generic ESP8266 Module, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most…
-
Switch the commentar of the last lines of setup and loop functions are not working on the HELTEC WiFi LoRa 32 V2
Link to Pin-Out: https://resource.heltec.cn/download/WiFi_LoRa_32/WIFI_LoRa_32_V2.pdf
…