-
## Details about Problem
The OneWire bus controller needs to release the line in order to allow the host to pull down it during read time slots.
As per stated in datasheets: "The control line …
-
@J-N-K I use your last jar from https://github.com/eclipse/smarthome/issues/6728#issuecomment-450370556
I get:
>23:06:12.846 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'onewire:temperature:…
-
Hello,
Forgive me if I ask something that has been already asked before.
I am trying to make the library work with a Pro Mini board with an Atmega 168 controller, but it doesn't even respond to …
lg007 updated
5 years ago
-
Hello. I just found some strange behavior of the onewire library.
I was using pin 2 to communicate with a DS18B20. In the documentation,
```
ow.write(pin, v, power)
power 1 for wire being held high …
-
**Edit: for easy reference, the proposed new API is at https://github.com/micropython/micropython/wiki/Hardware-API**
Since we have the WiPy TODO list (#1425) Damien and I spent some time today discu…
-
TimeOut, Arbitration, and Bus Busy errors cause by hardware faults are difficult to recover from.
The current `Wire.reset()` cannot successfully reset the hardware.
This can be tested by initing…
-
Attaching a ms5611 ( GY86 ) to the esp32 on i2c - works perfectly for about 5-10 minutes - some strange values do come in however it seems to work pretty well.
Then loads of
[E][esp32-hal-i2c.c…
-
Hi,
Does the library by default supports parasite power mode or do we have to enable it in the code ?
Sorry in advance if this is a silly question.
-
I have set up Home Assistant to work in multiple instances.
1. Master - faster machine
2. Slave - Raspberry Pi Zero - multiple sensors in remote location
My slave script looks like that:
```
#! /usr…
-
I have a project that has three I2C slave devices on a single bus (running at 100kHz). For some time I was developing with ESP-IDF 2.1.1 and everything was working pretty well, except for a weird prob…