-
Hi Xianjun,
My name is Nitin, first of all let me congratulate you. Openwifi is really very neat and strong work from you, thanks for doing it and sharing it.
1. Our image is used directly or…
-
Hi, I'm a researcher in FPGA design, but a beginner in Linux kernel. Currently, I'm looking for a suitable method for wireless mesh communication (MANET) for our project. I have designed PHY layer bas…
-
Openwifi is very strong thanks. Now, I want to realize a mesh network with Openwifi firmware. I tried to implement batman-adv on our platform (ADRV9361-7035), when I tried ton install batman-adv I hav…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
Done
**Issue description:**
Although, AP mode works great.
I observe a lot of bad-fcs messages in tcpdump when openwifi…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
I'm the author of #99 and my extension board is finally working. Now I'm trying to port Openwifi firmware. You already know my…
-
Hi,
I have a question about openwifi-hw. Is there an RX or TX interface in the FPGA program of openwifi-hw? I would like to transfer some external data through FPGA. Looking forward to your reply.
-
Hi,
I am using the latest openwifi image (1.4.0) on a Xilinx ZCU102 board.
In my experimental setup, the RF front end is connected to a channel emulator which introduces a non-negligible delay to…
-
Hello Dr.Jiao,
My board is MicroPhase ANTSDR AD9363, I followed the steps below, but had problems executing the . /wgd.sh command, I encountered a problem.
1. Downloaded mirrors in the table.
2…
-
We use cables to connect two openwifi boards to make them work in adhoc mode. We tried different frequencies and found that communication was normal at 2.0G ~ 6.0G. When using lower frequencies, such …
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image? directly
2. What is your own modification? Nothing
3. Ver…