-
- [x] The issue is present in the latest release.
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-gateway-os/issues) of this repository and believe that this is not a…
-
I have an arduino nano v3 and a RFM69HW. Everything works fine, but when I set: `radio.setHighPower();` it gets blocked when I perform: `radio.send(TONODEID,sendbuffer,9);`.
The RFM69HW is fed usin…
-
### Category
Hardware Compatibility
### Hardware
Heltec v2.1
### Firmware Version
2.3.9.f06c56a
### Description
Device: Heltec V2.1
Firmware: 2.3.9.f06c56a Alpha
Error: E (29334) gpio: gpio…
-
I encountered an issue with an older RAK v1.5 where the concentrator reset pin was 17 instead of 25, which is the default specified in the variant file for COMP-RAKHM. This was causing an endless loop…
-
Hi,
I'm trying to run the proyect on a Raspberry Pi 4 with Raspberry OS 32 bits with the Semtech SX1262 LoRa Module.
When running the receiver_listen.py or receiver_continuous.py shows the foll…
-
Is anyone else also facing the issue, that the CPU utilization reaches 100% on the receiving side?
I use a Pi4 2GB and have a constant 100% cpu utilization on one core.
![image](https://github.com…
-
It would be good to add support for esp_hosted component in ESP-IDF used by new ESP32-P4 SoC from Espessif. This chip has no onboard radios, but esp_hosted is designed to forward HCI requests to other…
-
### Category
Other
### Hardware
T-Beam
### Firmware Version
2.4.0.46d7b82
### Description
1. Get new device.
2. Update to latest stable firmware with web flasher.
3. Install app on phone.
4.…
-
It would be great if you could turn the UV-K5 into a packet radio data transceiver that supports the KISS-Prtokoll to communicate with the PC and the application. The coding and decoding of the 1k2 ba…
9V1LH updated
4 months ago
-
## Current Behavior
I have a BetaFPV Super D receiver 2.4 GHz, using it in Diversity mode. It appears the receiver always locks on Radio/Antenna 2 and never switches to the other antenna, whatever …