-
> > So it fails with Pixhawk only?
>
> good question. is it easy to replicate? is there anything relevant on dmesg by any chance?
It's easy to replicate:
1. Run w/ MAVP2P
2. Wait…
-
Hi
I have recently picked up one of 3DR's PixHawk Mini and I am trying to configure it using mission planner.
I am struggling to get mission planner to recognize the PixHawk Mini and load the …
-
I'm trying to connect my Jetson Nano using your OS (Ubuntu 20.04) and I tried this tutorial:
https://www.hackster.io/Matchstic/connecting-pixhawk-to-raspberry-pi-and-nvidia-jetson-b263a7
and I got…
-
Dear Sir
I really appreciate your great effort and your valuable contribution to the UAV field
I was trying to work with Pixhawk 4 (fmu v5). I was able to build and upload the firmware for the examp…
-
Hello guys,
We are trying to design our own LED module for the Pixhawk controller. As far as we understand there is a chip on the board that receives information from I2C bus then accordingly contr…
-
# 시스템 구성 방안
- X-Plane, Flight gear와 같은 기존 시뮬레이터들은 QGC(QGroundControl)을 통해 PixHawk와 연결되어 있음.
- 기존 시스템과 동일하게 QGC를 활용할 것인가?
- QGC를 활용하지 않고 바로 HILS와 PX4를 연결?
-
[Pixhawk standardní SPI konektor](https://raw.githubusercontent.com/pixhawk/Pixhawk-Standards/master/DS-009%20Pixhawk%20Connector%20Standard.pdf) má kromě SPI signálů pouze jeden další signál, jehož p…
-
由于中文翻译文件中使用的符号错误导致使用问题（航点无法设定）
解决方案：
1. 替换所有中文逗号，为英文逗号,
2. 根据报错提示，修改其余的符号错误即可
detailed description will update soon
what's more in order to fix this bug ,should I directly deliver a PR or…
-
how to send optitrack points to pixhawk through Rpi.≥﹏≤
-
Hi, I cannot move servo or send data to my pixhawk.
I can control my pixhawk via RC. I tried to set pixhawk's mode to "Guided, Stabilize, auto, manuel, FBWA" non of them worked.
there is my code:
…