-
Especially the error_main and qrdata_template values would benefit from that.
Probably means that we should implement the variable substitution differently and more centrally.
Variables from `[proxy…
-
If I were trying to add this:
`set statements = "filename = \"pxelinux.0\"; next-server = ac:16:81:65; option host-name = \"pxetest3.lab.beer.town\";" `
I'd assume I could code it like this:
`@foo …
-
U-Boot SPL 2016.09-rc1 (Oct 01 2016 - 21:31:35)
init i2c
rand test 0 MB RW, err cnt = 0
DRAM: 512 MiB ~
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
sunxi_board_init ok!
Trying to boot from MMC1
mmc_dev=0
…
-
### Describe the bug
If a system has several bootloaders, removing one of them does not trigger a cleanup in TFTPD directory.
### Steps to reproduce
1. Run `cobbler distro add --name dtest --ar…
-
After flashing your jetson-image using **`flash.sh`** , it successfully boots on the first attempt. However, subsequent attempts to boot fail. The initial boot is successful, but subsequent boots resu…
-
BMI currently reads or writes or both to these folders
/etc/bmi/bmiconfig.cfg
/etc/tgt/conf.d/
/var/lib/tftpboot/
/var/lib/tftpboot/pxelinux.cfg/
/var/log/bmi/
We were having some crashes due …
-
**Is your feature request related to a problem? Please describe.**
xcp-ng installer isn't currently supported. It's based on Centos and has a netinstaller ISO and documentation for [netbooting](https…
-
Any way to have both BIOS and EFI support without having to change the pxelinux config, thus making it mutually exclusive?
-
I want to redirect to pxe server on odhcpd - it is possible ?
`config dhcp 'lan'
allow booting;
allow bootp;
....
group {
next-server 192.168.1.2;
filename "/tft…
-
I have installed the TFTP server and PXE service with memtest image.
The PXE plugin appends to pxelinux.cfg/default the record for memtest with
INITRD empty row. This behavior does not permit to PCs…