-
Since the radio is available and quite common, I am surprised that - from what I could search - it has not been requested before. So maybe this as a serach engine hint, wait and see if there are any f…
-
It's not a bug per se but I think I have an issue for uvk# radios going forward. I'm working with a recent uv-k6 from Amazon and a uv-k5(99) fresh from China. I suspect that the latest OEM firmwar…
-
This device actually identifies itself as a D578UV2, V100. So I will call it that way internally.
The device is likely very similar to the D578UV and thus the existing codeplug implementation must …
-
It would be great to open/import an existing codeplug, which was created by the manufacturer CPS. This would help to switch to this software.
-
Hi. When pushing a codeplug with analog channels and DCS code, the DCS code is'nt pushed on the radio.
If i configure the DCS directly on the radio, qdmr is able to read them. Pushing the same codepl…
-
Allow from the Radio to save or change a talk group in a programmed channel. Currently you can change/save frequency, color code, talk group, etc.
-
# TODO
- enable/disable bootline1 override
- edit bootline1 override
- prefill bootline1 override 1/2 DONE
- enable/disable bootline2 override
- edit bootline2 override
- prefill bootline2 override 1/…
-
This device identifies itself as "D6X2UV2" with hardware revision V100 (1.00).
This device is very likely almost identical to the D878UVII, so "only" the codeplug format needs to be verified:
-…
-
At least for the DJ-MD5, in order for a channel to get imported as high power, it has to be listed as Turbo in the CSV. High in the CSV is then translated to mid. PNW Digital suggests high power all t…
sdt16 updated
2 years ago
-
If names are the same, then re-importing contacts will not corrupt channels and RX groups in your codeplug. If they differ, you will have to go back into each corrupted channel or RX group and fix it.…
ajorg updated
8 years ago