-
**Describe the bug**
Accessing the GPIO functionality on a Raspberry Pi4 is hindered by some special behaviour, that seems to be NixOS specific: `/proc/cpuinfo` is missing the hardware revision, and …
-
Does:
RaspberryPiDriverTest.cs run on the Raspberry Pi4 running WIndows 11 ?
(I hope the answer is yes!)
I've also installed ms code
-
Hi,
I upgraded my raspberry pi 4 to bookworm and kernel 6.6 and even if the GPIO pin 17 is triggered the clean shutdown down does not respond or shutdown the raspberry pi anymore.
I also changed th…
-
* Abstration for GPIOs
* make GPIO library exchangeable (RaspBerry,Odroid, ESP32, some abstract device)
-
I'm wondering if there is a way to connect the MKS TFT35 to pins on a BTT SKR mini e3 v2 board instead of the raspberry pi GPIO pins.
I suspect the is a good reason why this is not possible but I l…
-
**Project description**
An app for Raspberry Pi GPIO Output control and Input visualization, built in rust using the [Iced](https://github.com/iced-rs) GUI toolkit and [rppal](https://github.com/go…
-
# Controlling an MG995 servo with a Pi
Explore how to connect a Raspberry Pi with an MG995 servo motor.
[http://www.theappliedarchitect.com/controlling-mg995-using-a/](http://www.theappliedarchitect…
-
I use a ENC424J600 ethernet controller connected to a RPi Pico. The Pico also should generate the 25 MHz clock for the ENC424J600. In Zephyr v3.5.0 I used a PRE_KERNEL_1 SYS_INIT and the RPi Pico SDK…
-
With your demo code example, i get follow error: (All jumper aure OFF)
```
root@raspberrypi:/tmp/Motor-And-Servo-Driver-HAT/raspberry pi/python# python3 pca9685.py
Traceback (most recent call la…
-
I am using a Raspberry Pi Zero 2 W and currently don’t have an FTDI adapter. Is it necessary or mandatory for UART communication?
I am using GPIO 15 and GPIO 14 (TXD and RXD) for UART communication…