-
It would be fantastic to have people contribute a source of rails that can be used to mount a bunch of panels together.
For instance, I have these, and haven't used them due to lack of rails and ti…
-
I have a 1 daisy chain setup of (x9) 64x64 adafruit rgb led matrix panels, how can I make it happen?
The terminal tells me to make them ¨--led-chain=9 has to be divisible by 2¨, it displays a bad …
-
root@rPi3:~# ~/rpi-rgb-led-matrix/examples-api-use/demo --led-gpio-mapping=regular --led-rows=64 --led-cols=128 --led-row-addr-type=0 --led-chain=1 --led-show-refresh --led-slowdown-gpio=1 --led-para…
-
Hello,
Is there a way to specify a HDMI port? i would like to display what is on the second HDMI port without a monitor attached?
-
Does it support HUB12?
-
Hello !
I am currently using a Raspberry Pi Zero W V1.1. I am using it just to test things out until I get my hands on a Raspberry Pi 2 or 3.
I am using 64x32 1/8 Outdoor SMD P5 2727 LED Panels.…
-
I have just tested this ready made active adapter board on a Pi3:
http://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
It works.
I'm using it with 18 64x32 P3 panels
![2…
-
https://github.com/adafruit/RGB-matrix-Panel/pull/62 mentions a new driver I just wrote.
http://marc.merlins.org/perso/arduino/post_2020-01-01_Running-FastLED_-Adafruit_GFX_-and-LEDMatrix-code-on-H…
-
there are 64x64 HUB75 panels that only have A & B address lines.
The Raspberry pi LED driver project has added support for these panels, I would like to drive the same panels with my Smart Matr…
-
I use the Raspberry Pi 3 Model B+ (also tested this on a Pi Zero W, same result) with the "RGB Matrix Panel Drive Board For Raspberry Pi" from Electrodragon.
The top half of both panels in the 3rd ch…