-
The XVF 3510-INT as used within the SJ-201 Mark2 HAT is based on a rather old i2c audio driver;
https://github.com/PaulCreaser/rpi-i2s-audio
The below repository is used for (the in my oppinion ha…
j1nx updated
7 months ago
-
Currently I'm using RPI (slave) and LS1021ATSN (master) for clock synchronization.
Since Rpi does not support HW timestamping, gPTP.cfg is modified to use "software" in timestamping parameter. But t…
-
I have only just signed up to Github so am unfamiliar with their protocols, but...
I noted this project today and I see some admirable work developing this clock. I have been also working on an NTP b…
-
Hi,
I'm generating a PPS signal (@ every 500ms) from a third party device connected to RPi GPIO_4 pin. It looks like the offset between PPS and CLOCK_REALTIME (system clock) is unstable after few se…
-
As of `v0.8.1`, the `GPIOPwm` class has a `dutyCycle` setter, but I can't find anything to set the frequency. Are there plans to add such a feature?
I checked the native code:
https://github.co…
-
I am trying to run ./main.py and get the warning above. I have checked and see Bottle module installed and has a latest version.
Considering that maybe some dependencies are having issues I am going …
-
Hey there! Really cool project - thanks for sharing!
I was wondering, how can have you both input and output devices on the same I2S using circle? What are the changes you had to implement?
-
**Describe the bug**
The PIO-based SPI driver for the Raspberry Pi Pico (and the RP2040 in general) sends data out the SPI bus in the wrong byte order when SPI_WORD_SET() is 16 or 32 bits, and revers…
-
Thanks for your great work on the CWA app.
We are a group of researchers from TU Braunschweig. As part of a research project, we have studied wormhole attacks against Corona contact tracing, especi…
-
Implementation Notes
----------------------------
* Available from: https://www.adafruit.com/product/1393
* Datasheet: https://www.sharpsma.com/documents/1468207/1485747/Memory+LCD+Theory%2C+Prog…