-
to do: add these to the readme.
## Using Atmel ICE instead of Segger Jlink:
* On MacOS, install the following:
`brew install openocd telnet `
* Wiring up device
* Wire up "Vtref" to 3V3…
-
Hello,
recently bought 3 different models of xioa, rp2040, nrf51840 and samd21, the first two installed in arduino fine on my arm64 machine including the bossac dependency, but samd21 failed bo…
-
- Arduino board: Itsybitsy M0
- Arduino IDE version (found in Arduino -> About Arduino menu): PlatformIO in VS Code
- List the steps to reproduce the problem below (if possible attach a sketc…
-
Running the MIDIUSB library on MKR1000, I discovered with a debug statement in USBDeviceClass::ISRHandler() within USBCore.cpp, the handler is called continuously.
Specifically, adding Serial1.pri…
-
### Description
Using the example provided, I get white screen shortly after calling if (ts.touched()) on samd21 based boards(feather m0, arduino zero...)
### Steps To Reproduce Problem
…
-
Is this Atmel Evaluation Kit supported? I was not able to get it going.
Any help is welcome.
-
Having had some issues with Atmel's USB CDC implementation (hugging resources) I would be interested in trying this library.
I'm using the SAMD21J18A (the same as you use for Tessel 2) and would be g…
-
I have an arduino zero clone(samd21). and using this library to interface with mpu6050 imu.
Gyro yaw pitch roll example freezes as soon as it enters the loop.
It this a common issue?
-
Boot keyboard works fine, but NKRO keyboard causes the keys to do nothing and Improved Keyboard locks up the board and gives a USB error on Windows. I'm testing all of them the same way by changing bo…
-
I [might be possible](https://www.microchip.com/wwwproducts/en/ATSAMC20E18A) that you can use my [SAMD21 grblHAL driver](https://github.com/terjeio/grblHAL/tree/master/drivers/SAMD21) either as-is or …