-
could you please add support for SDIO protocol?
1. resolve CMD52, CMD53 and R5.
2. fix the bug resolving of Response by sequence rather than the bit field.
-
Love the board for stm32f446 - I followed the schematic and assigned these pin configuration for SDIO
Select 4 bits wide bus in stm32 cubemx
PC8 - SDIO_D0
PC9 - SDIO_D1
PC10 - SDIO_D2
PC11 - SD…
-
I am getting occasional write errors when I copy a number of files.
log.txt
======
[10ms] Platform: BlueSCSI Pico
[10ms] FW Version: 2023.04.10-dev Apr 30 2023 15:09:12
Flash chip size: 2048 kB…
-
Hello !
I am trying to test the WiFi module (IW612) available on i.MX93EVK and it fails when loading the moal module.
The Issue is detected on both Nanbield and Scarthgap releases.
Steps to re…
-
### Describe the bug
Hi, I find at least 2 random bugs, both of them showing mmc1: Controller never released inhibit bit(s) in dmesg first and following some error.
The first is wifi lost. I can…
-
Hello once more,
`uname -a`:
`Linux jayofelony 6.6.31+rpt-rpi-v6 #1 Raspbian 1:6.6.31-1+rpt1 (2024-05-29) armv6l GNU/Linux`
I ran into this issue after which the monitor mode quits, this is a c…
-
Hi guys, we got problem while using **BT RFCOMM** server in esp-hosted-ng:
- RFCOMM connection broken after transfering some data.
- The next RFCOMM connection can't setup after last connection b…
-
When I attempted attendedsysupgrade on my Raspberry Pi 3 Model B, the server built me an image for the rpi-2 profile. Is that safe to flash, or is the server building something that won't work? It s…
-
The ESP32 SD/MMC Host Controller Driver (drivers/sdhc/sdhc_esp32.c) supports 1-bit to 4-bit SDIO, but currently only supports the ESP32. Is it possible easily extend this for the ESP32-S3 or is SD/MM…
-
Support for the RTL8822CS SDIO chip has been merged so we can add WiFi/BT support to the following:
- Amediatec X96-Air (SM1) boards
- BananaPi WiFi mezzanine for BPI-M5
- LibreComputer WiFi mezz…