-
### Description
HyperX Cloud Core Wireless
### Headset Name
HyperX Cloud Core Wireless
### Device information
Detailed Device Information
```
Device Found
VendorID: 0x0951
ProductID:…
CeV35 updated
3 months ago
-
As with telnet, is there a way to use the UART or the USB port for serial communications allowing for config changes.
-
Hi there,
I'm currently using SOEM and SOES.
SOEM is running on my Windows laptop and SOES is running on stm32f407. When I test the round trip latency, I always need around 3ms to receive an upd…
-
Not really an issue but some help and guidance on getting this working using a Macbook Pro running Big Sur
Using a ESP32 WROOM32 based board which I have selected as DOIT ESP32 DEVKIT V1 on the Ard…
-
I've been using your hardware interface on my robot and it has been working great when using teleop with my RC controller. I am now moving onto SLAM and Nav2 for autonomous navigation. I picked up a D…
-
### What would you like to add in terms of software changes?
We should offer an ability to fine-tune the power values returned by a stock wand so the user can adjust to their needs. This is more impo…
-
The F4 (and maybe F3) have a lot more DMA channels than the F1. That means we can upgrade to using DMA for the serial communications. This might reduce the load for telemetry or even allow higher se…
-
Hi,
A week ago I setup NUT Server on a Raspberry Pi 3 connected with USB to **Powerwalker VFI 1500 RMG PF1** UPS.
`nut-scanner` detected it like
```
[powerwalker]
driver = "nutdrv_qx"…
-
Could we please get an option to use a TCP connection for the serial access to the Flipper?
That way we can use "Communications Bridge Pro" to conect the Flipper to Linux container on a Chromebook or…
-
### Description
Add support for Logitech G435
### Headset Name
Logitech G435
### Device information
Detailed Device Information
```
Device Found
VendorID: 0x046d
ProductID: 0x0acb
…