-
CNCserver works based on an assumption that by sending certain commands on a serial output will result in moving a bot for CNC.
Currently this only supports the EBB and its limited command set and us…
-
If not could you help me to make it working on my eShapeoko when it arrives (probably after mid january).
TIA
Regards
Carlo D. (onekk)
onekk updated
9 years ago
-
#### Description
Hello!
We're running a Shapeoko 3 XXL with GRBL through NPM (I think?) at my local makerspace and it is no longer jogging. Communicate is established and it will home without er…
-
I need some suggest for add the manual MPG encoder, for JOG movement?
My application I have two arduino Mega. One arduino running the GRBL 1.1 and another for other simple operations, like safety i…
-
#### Description
When using inches, the panel shows each axis position using 4 decimal places. My rig (Shapeoko 2 with Arduino) is not that precise. In other words, when I move it to X1Y1, the pane…
-
I wanted to add a custom machine but run into a few hurdles raising many questions:
- I seems machines can only be added at compile time?
- I suspect the `.tco` file defines the 3D view of the machi…
-
ver 4.0.16 worked well, 4.0.17 hangs at halfway progress. Tried older Onshape files that worked before, same hang issue. Cleared cache, no change.
-
Has anyone been able to use commercial software like artcam or aspire to output usable CNC file ? I get errors on all of them(mach3,gecode,etc.) Using arduino CNC and gcode sender
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Problem description
This appears to be an edge case where the path generator creates a large-radius arc (radiu…
-
We have been using G92 - temporary coordinate system offsets for our homeing procedures.
This means that we have been storing the distance between the limit switches, probe plate, work area and spoi…