-
output of `sudo evtest` is:
```
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: Lid Switch
/dev/input/event1: Power Button
/dev/input/event10…
-
Hi I have a Daly BMS 12v 4S 100amp device. And I have a daly usb-mon (meaning it has the 3 pin monitor connector rather than the 5 pin Uart) serial converter. It works fine with the win10 Daly Sinow…
-
I fully charged the mouse as seen in Gnome's Power Setting for Bluetooth devices, still get 0% charge in Battery menu when in RF mode:
```
bam@Box:~/tmp/rogdrv$ rogdrv --debug
[2022-03-16 00:51:33…
-
***Disclaimer***
---
I do not have board with BYK916, but I still noticed some things, that would be good to follow/reference.
Some features/pins/polarity might be configurable in firmware.
I'…
-
Hello,
I expect you'll say no, as the user needs to be logged in remotely before they can connect remotely with ssh-rdp, but I was wondering if it would be possible to let more than one user to lo…
-
Thank you for this! My rk61 is working beautifully with it, I traced the pcb connections between the key switches and the mcu. I haven't traced the led connections, though. I will probably post more…
-
### Device Info
* Name: Kraken Kitty V2
* Product Number: RZ04-04730100-R3U1
* Model Number: RZ04-0473
### Device Information
```
Bus 003 Device 002: ID 1532:0560 Razer USA, Ltd Razer Kraken…
-
**SH68F881**-specific findings
---
Should be not related to firmware it's running (**[BYK801](https://github.com/swiftgeek/hykker-re/issues/6)**)
Normally LQFP64 package would have "SH68F881Q" mark…
-
Program doesn't support Royal Kludge R65, it shows connect a Royal Kludge Keyboard to get started.
-
Hi, following the installation instructions from this site failed:
git clone --recurse-submodules https://github.com/kyokenn/rogdrv.git
Cloning into 'rogdrv'...
remote: Enumerating objects: 788…