-
**Describe the problem you have/What new integration you would like**
Add support for SK6812 White chip and WWA as seen at the bottom on their [product listing](https://www.btf-lighting.com/pag…
-
Thanks for sharing a great project! Everything works fine, but there is one problem that I cannot fix.
I am using 14 channels of 512 pixels each. Approximately every 5-10 seconds, one random pixel fl…
-
Hi,
I use the T-ETH-Lite-ESP32S3. Later I would like to equip it with the PoE Shiled.
I use VSCode and I adapted the platformio.ini as describet [here](https://github.com/Xinyuan-LilyGO/LilyGO-T-…
-
![i2s_sk6812_sck_period](https://user-images.githubusercontent.com/1174029/41493548-3342a9c8-70bd-11e8-8987-71d24e42f050.png)
![i2s_sk6812_ws281x_decoder](https://user-images.githubusercontent.com/11…
-
According to the first sketch:
![appSketch](https://github.com/user-attachments/assets/58f2eddc-ed09-4a1c-9237-2ecfbd84448a)
Create the layout, without programming actions
-
### The problem
In my kitchen, I want led strips (SK6812) on top of the kitchen cupboards, as well underneath them to shine on the counter.
For this situation, I intend to use a single ESP32E config…
-
I have been tinkering with an sk6812 light strip (with about 500 lights) and also with ways to correctly address that.
The smart-leds-traits crate does provide for an RGBW type. However, the ty…
-
Great project, thanks for sharing :)
I am looking to build som props using [these ](https://de.aliexpress.com/item/1005005930597006.html?spm=a2g0o.order_list.order_list_main.38.49b35c5fYaiGtt&gateway…
-
- Arduino board: Espressif ESP32 3.0.4
- Arduino IDE version: 1.8.19 and 2.3.2
Choose the Arduino Nano ESP32 from the Espressif esp32 board.
Partition Scheme: With FAT
Pin Numbering: By GPIO…
-
The SK6812 controller awaits a ~80μs low signal between data transmission.
Taken from: https://cdn-shop.adafruit.com/product-files/1138/SK6812+LED+datasheet+.pdf
Currently, if we run the sync() fu…