-
After the computer is returned from sleep, ADB no longer recognizes the device. Currently needs to be unplugged and replugged.
-
On Linux Manjaro: After resume from sleep it takes 5 - 10 seconds before the internet connection is established. Whatsie does not wait for this and does not report this. When I notice this I have to r…
-
Addition of a sleep timer for the display in the Settings menu.
Sleep options would consist of following fields to be specified by the user:
- Sleep mode (On/Off)
If Sleep mode is "On":
- S…
-
### Description
Currently, the detection of sleep will also serve as non-wear detection (most non-wear periods will also be detected as sleep, as from an accelerometer point of view they are the sa…
-
There's a number of zio-kafka tests that are doing sleeps to wait for some condition to occur, which have a high risk of being flaky.
A better solution is to use a `Promise` to signal that some con…
-
First of all, I must give my thanks for this developing this software, it is keeping my headset from turning itself off all the time which is a nuisance.
This issue has previously been mentioned [h…
-
Twitter will force log out if you're browsing for too long. A random sleep while downloading will thwart that detection attempt.
1. While downloading, every (Minimum)~(Maximum) downloads, it will r…
-
msleep() is listed as supported by XilTimer, but its prototype is missing from sleep.h.
[Standalone Library Documentation: BSP and Libraries Document Collection (UG643)](https://docs.amd.com/r/en-US…
-
The list of join layers for the sleep study:
- county parks: https://gis-mdc.opendata.arcgis.com/datasets/a2cbc77f2f9e4e698aaa72f8c5d2db33_0/explore
- city parks: https://gis-mdc.opendata.arcgis.com…
-
Hi All:
I just moved my WiCAN from using MQTT to AutoPID last week. I have noticed now, that the sleep function may not be working. Or maybe with autopid it polling more than I had MQTT set at. I …