-
Guys, I'm having difficulty configuring this mks mini12864 v3 display with smoothiware, in fact my ZMORPH board burned out, so I'm using an MKS Sgen_L V1.0, the zmorph fork available here on github. I…
-
I am Using Cura 3.0.3 and I cannot print with dual extruder. I am using Smoothieware firmware. M104 T1 Snnn is considered a tool change command. I think Cura assumes this wouldn't change the tool but …
-
https://github.com/eyal0/OctoPrint-PrintTimeGenius/issues/62#issuecomment-412255356
User's jerk/acceleration/etc settings were not copied correctly from the printer to the printer settings. Not su…
eyal0 updated
6 years ago
-
Where is the `firmware.bin` coming from? Do you guys have modified source that you've compiled, or is this just some old version?
`md5sum firmware.bin` = `94d55fc762f38184ac9de1a7b20eabb3`
...b…
-
I want to use Smoothieware, but i dont know where is the firmware
JartX updated
4 years ago
-
Altough velocity extrusion is used to drive FFF 3D printers with Machinekit there is currently no real adavnce algorythm implemented.
A possible approach could be based on using the delayline compone…
-
Basically these two upstream issues:
https://github.com/Smoothieware/Smoothieware/issues/635
https://github.com/Smoothieware/Smoothieware/issues/617
Slightly different internal causes but similar sym…
-
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/blob/b934d99e8bf8ba63c65cd2d8ab613fe5cf23c49c/firmware/smoothieware%2BTFT35/config.txt#L195
-
I murdered my poor Skr v1.3 board with a loose wire my fault Doh. So i got a new Lpc1768 ic & other bits and fixed it. I was looking for a Bootloader i found this one
https://github.com/Smoothiewar…
-
The files contained in `src.zip` are not sufficient to compile the project.
The files and directories next to `src/` are also required.
For reference, see what is included in the [official Smoot…