-
[socketcan-rs v2.0](https://github.com/socketcan-rs/socketcan-rs) is finally out, and I'm looking at what to do next for it. Adding async/await seems most likely. I want to add support for the three t…
-
Good afternoon,
I'm developing the CAN-Bus controller for Android using SocketCAN.
Does library work obd-java-api with SocketCAN?
Thank you.
Andrew.
-
See Qt implementation: https://codebrowser.dev/qt5/qtserialbus/src/plugins/canbus/socketcan/socketcanbackend.cpp.html#_ZN16SocketCanBackend10interfacesEv
pd0wm updated
3 months ago
-
I noticed that the Sync and async-io implementations of write_frame followed the CanAnyFrame usage pattern for the CanFdSocket, however the implementation in tokio.rs was only capable of sending CanFd…
-
When the connected device is no longer available on the bus after a message transmit USB2CAN is always reporting error frames. You can't clear the send buffer. Tons of error frames are receiving and y…
-
I’d like to set capture filter for CAN ID.
Either specific CAN ID variable, or being able to specify which bytes of the payload to match.
Similar to this for selecting ID 5c2:
ether[2:2] == 0x…
-
Compiled on Fedora using all current developmental headers.
Code:
sudo modprobe vcan
sudo ip link add dev vcan0 type vcan
sudo ip link set up vcan0
socketcand -i vcan0
Output:
Error in beac…
-
hi, I set socketcan->receiveOwnMessage( true ), but not work. I still can receive sent message.
-------------------------------------------------------------------------------------------
So…
-
Hi there,
I experience "segmentation fault" after the very first read. You can see messages below that it received the first frame, and when reading or in the read(), it failed consistently. I can't…
-
I'm using a Raspi 3B+ as a CAN bus participant, with the can0 interface. I have noticed that when sending many CSP packets, the write() in csp_can_tx_frame() eventually returns with EAGAIN = Resource …