-
### Describe the bug
As mentioned here https://github.com/wills106/homeassistant-solax-modbus/pull/772 I want to report not working values related to the EV Charger
### Integration Version
2024.03.…
-
### Describe the bug
SolaX EPS Yield Total has wrong value. I have 2 891 kWh in the Home Assistant but FVE is running only two month in EPS mode. In the Solax cloud page there is 288.60kWh. It seems …
-
### Describe the bug
Since some days ago all registers greater than 1023 can not be altered anymore. There was a power outage caused by system itself thinking DC voltage from panel was too high- but …
-
### Describe the bug
After updating from 2024.04.03 to 2024.05.03 the following Batterty entities disappear / become unavailable
- Battery Charge Max Current
- Battery Minimum Capacity
- Charger U…
-
### Describe the bug
In a parallel system when you send the remotecontrol values to the master inverter it also applies them to the slave inverter.
The problem is the power limit values allowed are …
-
### Describe the bug
There is invalid information and missing information :
Grid Export (W) = Measured Power = nearly Pw Power total
Grid Import (W) = always 0
Total Grid Export = Total Grid Imp…
-
Hi,
I would like to adapt this controller to the new G4 Solax Inverter. The problem is that the Control local method by Modbus has changed from G3. Anyone has the new Modbus Map for G4 generation? …
-
### Describe the bug
For some reason I cannot not write into entity via solax modbus (tcp or rtu - doesnt matter). This is very new behaviour, it was normally working for few years now. But few days …
-
HAS does create all the entities. But al the values are zero. Probably because the datalogger stick is not communicating well with the inverter, although the orange light on the datalogger is steady…
-
### Describe the bug
After upgrade to HA 2024.6.0 during the startup new warning appear during solax_modbus integration init. Those are linked to the additional HA checks for identifying integration …