-
The speaker volume of the Box-3 Voice Assistant is very low. Even in a quiet room you can barely hear it. Increasing the volume_multiplier config setting does not change anything.
-
Hi there!
I installed ESPHome firmware in my sonoff tx-ultimate switch and tonight I faced a bug when vibro started working instantly and switch couldn't work properly (nothing happend when I touc…
-
### Discussed in https://github.com/SmartHome-yourself/sonoff-tx-ultimate-for-esphome/discussions/4
Originally posted by **kroon040** June 9, 2023
Is it possible to have the config made for t…
-
Hi,
Is in tasmota also the new i2s audio available?
In the ESPhome that I test , the speaker works now fine.
https://github.com/SmartHome-yourself/sonoff-tx-ultimate-for-esphome/discussions/4…
-
Hello I will flash on an Sonoff tx ultimate Tasmota. But every time when i try that the flishing ist completlly fine but there is no hotspot. and when i conect me via com Monitor i become this messag…
-
Hallo zusammen ich bin mitlerweile komplett ratlos. Immer wenn ich versuche esphome auf meinen Sonoff Ty ultimate Flasche funktoert das ohne Probleme (wie im Video nur über esphomeflsher. Aber dieser …
-
So i've gotten pretty close to getting windows 10 arm to boot. But for some reason after selecting the boot device it wont no longer detect the keyboard, when the press any key to continue prompt arri…
-
Hi,
Did someone manage to connect/pair with the APsystem YC600 micro omvormer.
They should connect with zigbee but it is not pairing at all.
Any sugestions are welcom.
Kind regards,
Peter
-
**Have you looked for this feature in other issues and in the docs?**
The need to run Tasmota on Ethernet-connected devices is obvious. We could finally dump all the issues WiFi may cause in certai…
-
Hi I bought 2 of these devices cheap as chips off ebay. V2.3 with no RX/TX pads and no IR connected.
I flashed one of them with the latest tasmota build using esptool (via raspi with serialUSB), mak…