-
Hello, I always get the error message Error evaluating 'gcode_macro PRINT_START:gcode': gcode.CommandError: This error is caused by the sliced file not having LABEL_OBJECT enabled or by your slicer'…
-
Anyone have any idea how to add this sensor to a sovol sv07 plus?
Is there any expansion boards that can be used?
Could it be connected to a USB port from the klipper screen?
-
Please upload the schematics for the controller board. These will likely be `.SchDoc` files. While you're at it, there's nothing here at all for the electronics of the display or the tool head breakou…
-
When I flash the firmware with UBL, the printer starts beeping and shows an error about Bed Temperature.
How can I fix it? Using latest version from Releases Page with UBL
-
### Description of the bug
Imported attached STL file into Windows client version 2.7.4. Expected to be able to view imported model. Instead, client experienced rapid unscheduled disassembly. The pro…
-
Hi there!
I was trying to use your created printer.cfg with the Sonic Pad. After removing the Line:
[include mainsail.cfg]
the file could be imported into the pad and also the connection worked. …
-
I try to fix in different way, but it doesn´t matter to give the configs this requested value - no change.
Any Ideas welcome.
I know this is deprecated since month.
in toolhead.py there are r…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
2.1.1
### Operating System (OS)
Linux
### OS Version
Ubuntu 24.04
### Addition…
-
### Cura Version
5.7.2
### Operating System
Window 10
### Printer
Sovol 01
### Reproduction steps
On Thingiverse, chose a thing, clic on "Open in Cura"
### Actual results
Ultimaker 5.7.2 don'…
-
I have some custom Tool Change Code in prusa slicer where for every tool change it does the following
{ if previous_extruder>-1 }
T{previous_extruder}
M106 S0
T{next_extruder}
M106 S255
{ endif…