-
Hello,
I'm currently looking into writing an implementation for a Winbond W25N01GV NAND flash for ST MCUs over QSPI.
As I've seen there have been some others which have also done this (any source …
-
Dear all,
I use the nRF52840 DK with Segger Studio and a Micron SPI SLC NAND 2Gb (256MB) Flash memory. I have already implemented the basic write read and erase functions for the NAND chip and the…
-
### Answers checklist.
- [X] I have read the component documentation [ESP-IDF Components](https://components.espressif.com) and the issue is not addressed there.
- [X] I am using target and esp-id…
-
### Answers checklist.
- [X] I have read the documentation of the component in question and the issue is not addressed there.
- [X] I have searched the issue tracker for a similar issue and not found…
-
### Describe problem solved by the proposed feature
- Boards such as the KakuteH7 V2/H7 Mini have a Winbond W25N01GV NAND flash chip instead of a SD card slot
- The small size of the H7 Mini as we…
-
### Answers checklist.
- [X] I have read the component documentation [ESP-IDF Components](https://components.espressif.com) and the issue is not addressed there.
- [X] I am using target and esp-idf v…
-
### Board
ESP32-S3 Dev Module
### Device Description
Reflections open-source project uses ESP32-S3 Mini 1 with a Nand (an SD in SMT format) XTSD01GLGEAG chip. Schematic and Gerber files at https://…
-
使用的是W25N01GVZEIG NAND Flash，看了手册有Unique id，需要读出来用于加密，看了内核驱动，不知道怎样做
-
[Tests of users](https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-wifi-ax-discussion/94302/5525?u=daniel) suggest that correctable bit-flips in SPI-NAND connected via SNFI on MT7622 do *not* ge…
-
### Describe the bug
I configured the **MediaTek MT7986 802.11ax/b/g/n** radio as both ap and monitor (for WIDS purposes) on my BananaPi BPI-R3. Running `tcpdump -i phy0-mon0` runs fine with no pro…