-
Hello!
Thanks for the effort to start Lora on Esphome!
I try to get the code running, but it does not really work. I have Heltec Wireless Stick Lite V3, so the pins should be okay. Also I have a…
-
Hi,
Trying to transmit data using LoRaBasicsModem stack with STM32CubeIDE environment, SX1262 NiceRF module and NUCLEO-L476RG EVK. SPI communication is working in debug mode(between Lora Module and…
-
Hi Kyle,
thanks for sharing your hard work!
Do you see any change to support the newer chipset SX1262 with your code?
br
Peter
-
There seems to be a mismatch between the size of the local arrays that hold the return value at functions in sx1262.c and the actual return value as it is states in the datasheet https://semtech.my.s…
-
I've been testing your library on a SX1262 and I've seen that method 'setTxPower' fails for values lower than 14dBm.
I'm new at programming but I think that, on file "SX126x.cpp" -> void SX126x::set…
-
The [CubeCell GPS-6502](https://heltec.org/project/htcc-ab02s/) is an SX1262 board and has GPS capability, but we just need LoRa and OLED display working for now. Explicitely supporting GPS within the…
-
twatch s3 ~ t-beam v1.1 radiolib lora sx1262 How to set up LoRa communication
-
Good morning all,
I have just received my new Heltec Lora V3 to complete my project, however I note that the architecture is quite different with the ESP32S3 and the SX1262
First I notice that the L…
-
Hello,
I am trying to use LoRaMesher with a t-beam-supreme-s3 and am encountering some difficulties.
I am trying to use the counter example.
The board uses sx1262.
Here is the code I am using:
…
-
Has anyone been able to use this library (or any other) to establish a connection with a SX1262 to the TTN network?
Tom