-
Hi all,
I want to integrate the sx1302 lorawan packet forwarder with aws server it requires aws key, certifates, trust certificates.
I am trying to configure with sample configuration files am not…
-
I am trying to make a lorawan gateway simulator which I can connect with AWS Iot core for LoraWan service to recieve uplinks. While running basicstaion in this gateway simulator, I am getting issue in…
-
I am using RAK7246G class B mode for testing uplink/downlink, the device is RWC5020B, from the station log, I saw RWC5020B successfully joined and received join accept from AWS IoT. It received the be…
-
While attempting to replace the factory image on a Sensecap hotspot I identified the concentrator as being a sx1303 and not an sx1302. The existing codebase here does not support this version of the …
-
I have configured miner (using docker image) and semtech pkt fwd sx1302. What to do after this? How to add this diy gateway in helium block chain. Please provide some information.
-
I am using basicstation 2.0.6 with sx1302 concentrator for EU865 region and v4-chirpstatck docker as my LNS.
I have made the following modifications in the station.conf file to enable class b beacons…
-
Hi ,
Recently I got a sx1302 module with raspberry transfer board , I try to execute with compiling the open source sx1302_hal codes .I tried to test with test_loragw_reg , the result as follow …
-
Hello,
I would like to integrate the esxp1302 code with Tasmota to take the benefits of sending any data over MQTT with 8-channel LORA.
Tasmota has already this capability, named bridge, but for si…
-
I am trying to setup the sx_1303 LoraWAN gateway as given in the official documentation. I have created my TTN account and trying to execute chip_id file but am getting following error:
CoreCell …
-
I would like your help to debug an issue.
I have Semtech SX1302CxxxGW1 Corecell Gateway. I was setting up the Lora Basic station gateway in the SX1302CxxxGW1. I have implemented Lora Basic Station …