-
#1
For the analog device: create it or export a solution from an online source.
-
@jaswsinc writes...
> I was just looking over some design concepts, when I saw this and it gave me an idea.
>
> , it should be possible to get [higher-precision timing](https://developer.chrome.com/blog/c…
-
I'm running RatRig V-Core4 500 with a Orbitool board. I keep getting lost communication error. I've tried multiple toolboards, USB pcbs, and cables. I ordered 3 toolboards, so I had 1 for IDEX an…
-
When the tachometer pin on a 5 volt 3 wire Delta axial fan is used with any of the fan ports, it results in the fan shutting off instead of spinning and no tachometer output is given.
I had initia…
-
We are still using yarn v1 in this repo – we should migrate to a more modern solution.
After internal discussion we decided on pnpm. Two challenges:
1. Volta has [experimental pnpm support](http…
-
I try to click/touch 41st and 44th minute on clock, but it's really tough thing. My proposition is, to make the click change like tachometer or gauge, so user can only touchmove to move the clock's ar…
-
Simply plugging the tachometer pin into a free endstop port doesn't work well. The pullup voltage on the endstop pins is too low compared to the 24V power to the fan, so the fan spins constantly, sin…
-
### Problem
To show the kernel usage in the sidebar after clicking the tachometer, ipykernel package version should be >=6.11.0 When it is not the required version, we get "kernel usage not avail…