-
### Is your feature request related to a problem? Please describe
I wish to have the opportunity to add Sensors or / and Relais to the Board.
### Describe the solution you'd like
Control Relais ove…
-
## LPC1769 Modules Used in the Project
For this project, the following modules of the LPC1769 board will be used:
1. **GPIO**: Will be used to connect a 7-segment display, which will show the co…
-
### Discussed in https://github.com/jmcollin78/solar_optimizer/discussions/26
Originally posted by **marekchowaniok** March 13, 2024
Hi @jmcollin78 ,
I came across this repo/HACS and I won…
-
What should we use in HVAC evaluations? @ozanbarism
Like in `scripted_compare_models.py` what should we be asking the LLM and then how to rank results?
https://github.com/bbartling/HvacGPT/blob/d…
-
Upgraded to HA 2024.8 and seemingly the temp control for the IR HVAC device has gone missing. Before I could control it from my min value to the max one, configured in yaml.
Below screenshots of t…
sjaks updated
2 months ago
-
Orca slicer seems to generate temperature control commands using "M104" with a comment at the end, like so:
**M104 S225 ; set nozzle temperature**
This happens for example if you do a temperatur…
-
These are the controls from a single Futurehome thermostat. I have five of these, so I got 25 controls.
The expected outcome would be a single square control, showing the current thermometer-temper…
-
Hi,
No matter what I do, I cannot remove the temperature sensor from zigbee2mqtt expose tab.
I deleted "device_type: TEMPERATURE_SENSOR" from the zigbee attribute but nothing changes at ZIgbee2…
-
I think that heaters are a good fit as a ScalarCmd actuator type; however, there's at least 2 kinds of control I've seen:
1. 0 is off, 23-40 are target temperatures in Celsius (thinking about it, I…
-
### Link
https://www.aliexpress.com/item/1005006724896566.html
### Database entry
{"id":18,"type":"Router","ieeeAddr":"0xa4c138d49643100f","nwkAddr":40220,"manufId":4417,"manufName":"_TZ3210_bfwvfy…