-
### Machine Context
I would like to build a machine using trinamic 035 drivers in a trinamic 301 motion controller which does not accept step/dir command instead it needs SPI messages sent to control…
-
Hello,
can you please add the boards TMCM 0930 and TMCM 1230?
Thanks
-
Still an issue. Several reports. Can it be something else but the codec?
"Audio (both sent and received) is distorted and full of static -- basically unusable -- at the beginning of a call or meeting…
-
### Troubleshooting docs
- [X] My problem is not solved in the Troubleshooting docs
### Anaconda default channels
- [X] I do NOT use the Anaconda default channels (pkgs/* etc.)
### How did you ins…
vyasr updated
1 month ago
-
strangely enough, this fails:
'''python
import pytrinamic
from pytrinamic.modules import TMCM6214, TMCM6110
isinstance(TMCM6214, pytrinamic.modules.TMCLModule)
'''
when I check the type of TMCM6…
-
Hello,
Can we use this driver to control TMCM-1240? If not, is it possible to tweak the codes to accomodate TMCM-1240? What changes might be required in this case?
Thank you!
-
### Additional comment:
@conda-forge-admin, please add bot automerge
-
I would like to improve the precision of homing by doing the following:
- Move to reference switch at speed
- once tripped, stop, and reverse off slowly, stop when switch turns off. Note position…
-
Can you please add the board TMCM-1021? Thanks!
-
I have a gcode file that was generated by flat cam. The gcode is inches and it begins with G20. My Arduino nano with grblv1.1 is set to $13=1. on the GRBL Tab this panel that says "Program limits" di…