-
I use the Indoor Air Quality Sensor (ENS160, SEN-20844) and some other sensors connected to the DataLogger IoT (DEV-22462, firmware 01.02.00) via Qwiic. When reading the air quality parameters, the va…
-
As of Home Assistant Core 2024.9.0, the following error is thrown for the following action:
```yaml
data:
ieee: sensor.bedroom_vindstyrka_pm2_5
endpoint: 1
manf: 4476
cluster: 64638
…
-
Any chance you can share / add your yaml config for HA?
-
### The problem
The AGS10 sensor requires a bus speed no greater than 15Khz
This setip works perfectly on a standard ESP32 dev board, but on these small ESP32-S2 Mini board (the little purple ones) …
-
The TVOC gets updated fine, but humidity and relative humidity stays 0.0. Is it a known problem? Thanks!
-
Adding wellbeing account succeeded but no entites were found.
024-02-14 16:58:18.617 DEBUG (MainThread) [custom_components.wellbeing] Received new token sucssfully
2024-02-14 16:58:18.710 DEBUG (M…
-
There seems to be something wrong with the way the Thingy 2.1.0 firmware manages CCS811 calibration.
I've set up several Thingies next to each other in a interior space several meters from a forced…
-
Hello,
do you calculate the TVOC and eCO2 values with compensation of the temperature values from the BME280?
-
It was working well for several days but now it provides a few readings and then stops working, with CO2=400 (base level) and TVOC=0. This is weird.
-
Hello! I just got the sensibo air pro which had additional sensors that track tvoc and c02. Would like to request that it can be tracked in homekit/Eve like the humidity and temperature.