-
I would like to know whether Carla supports ultrasonic radar. I saw an obstacle sensor, but it can only detect the front obstacle, so how to detect the rear obstacle? It would be nice to have ultrason…
-
![화면 캡처 2021-08-21 101404](https://user-images.githubusercontent.com/88171531/130306059-181278d1-19ac-47df-ba67-e96dc0455ff2.png)
-
The Ultrasonic no longer works. It only returns a value of 0.
-
We have looked at several Ultrasonic sensors, all of which have some issues.
**[Murata MA40H1S-R](http://www.murata.com/en-us/products/productdetail?partno=MA40H1S-R)**
- This is one of the only SMD …
-
Hi everyone,
I'm trying to use ICU-10201 sensor without the EVK board. I implemented a specific hardware using a 1.8v regulator as explained in a previous issue. However, I can't make it work. The …
-
Using your knowledge of the servo, LEDs and ultra sonic sensor. Build a sudo radar system with the following requirements.
1. Arc 180 degrees.
2. Scan everything in the 180 degree arc and build…
-
-
ultrasonic sensor
native code:
```
long readUltrasonicDistance(int triggerPin, int echoPin)
{
pinMode(triggerPin, OUTPUT);
digitalWrite(triggerPin, LOW);
delayMicroseconds(2);
di…
-
### The problem
I am using jsn_sr04t in mode 1 (continous measurement via serial) to measure water level in tank.
Shortest measured range in my sensor is around 220mm but any measurement below 2…
-
Create C++ code for controlling all sensors. Ideally, have it broken down into multiple programs:
Keypad controls seven segment
Keypad controls speaker
Sensor calculates distance
RGB LED with so…