-
**Describe the bug**
Installation process resets and/or disables all USB devices when installing to an USB external device (case with SSD). It seems that it disables USB plugged drives/devices when i…
-
**Describe the bug**
I am using a raspberry pi, with ubuntu in which gphoto is being used. The issue is when calling the camera capture command simultaneously, the gphotos stops communicating with th…
-
Hi,
I found a little Bug for HUB in hub.c
in Line 77 use C_PORT_RESET instead of PORT_RESET
same thing in Line 189.
When I use a HIGH SPEED HUB, all is OK. But When I use a FULL SPEED HUB , …
-
**Describe the bug**
Installation process resets and/or disables all USB devices when installing to an USB external device (case with SSD). It seems that it disables USB plugged drives/devices when i…
-
At the time of reflashing, I performed the U-Boot update item. I got it right, and the yellow LED. But after turning it off and on, the camera no longer showed signs of life. The file was not written …
-
Is there a function in this library that can be called to reset a connected USB device?
-
The device must control a device with a USB interface.
The device is assembled on ESP8266 and USB HOST mini (DuinoFUN USBmini V2.0 Aug.16,2014).
I am using your library (acm_terminal). Everything is…
-
Greetings
Raspberry Pis keep losing camera connection.
http://blog.brainmassage.co.uk/2012/12/raspberry-pi-usb-reset-code/
Shows the code to resolve the USB issue for the Raspberry Pis and will als…
-
As far as I can tell, to use USB-HID, you need to change boot.py to include:
```
import pyb
pyb.usb_mode()
```
However, this is not really an option with MicroHydra, so I propose *before reseting…
-
I noticed that when you connect the HDMI cable to the host, sometimes the host's screen doesn't work correctly, blank screen in the host.
Same problem applies to the keyboard when the host's keyboard…