-
### Is your feature request related to a problem? Please describe.
My board is Fysetc Spider 2.3, and I buy a wifi module(SPIDER-RRF-WIFI) for the board so that I can control by 3D printer with my la…
-
Hi,
I have been trying this on my Redmi Note 11.
I have tried 3 different usb-serial adapters (ft232, cp2102,pl2303). Also changed cable and flipped connection.
Enabled these configs in kernel …
-
**Expected Behavior**
The Fibocom FM350-GL modem should be recognized and function correctly with the OpenMPTCProuter on my Raspberry Pi 4B, similar to its performance with OpenWRT.
**Current Beha…
-
Web flasher can't find usb sonoff dongle E device.
Driver was installed.
Win11
![image](https://github.com/darkxst/silabs-firmware-builder/assets/39081381/cd2c5f4b-3af6-4097-9cc2-70269affc9c9)
-
The device serial numbers from FTDI chips are being extracted incorrectly on windows systems. There is an added "A" in the end of the serial number. I tested this with several FTDI adapters and using …
liudr updated
3 years ago
-
On testing a program with a serial device, it was running fine with PL210x- and ftdi-USB-serial adapters plugged into the IOT, it failed with wrong received data on two CH34x-based adapters. Practical…
df5zx updated
3 years ago
-
as discussed in https://github.com/arduino/arduino-ide/issues/1788 brltty v6.4 has a major flaw that blocks many serial adapters like those from Arduino boards (CH340) from accessing the USB port. The…
-
Hello fanoush,
I followed this repo for quite some time and now wanted to try it out myself.
I tried to flash the device (Mpow DS-D6 from gearbest, I have 3 units) with your espurino DFU file but …
-
### Summary
When I use `list_ports` to provide a list of serial ports to a user in linux, they are only shown ports directly under `/dev/*` (excluding sudirectories). This can result in multiple p…
-
Hi,
I'm trying to use the Amiga core to connect to some dial-up BBSes. To do this the Amiga needs access to a real modem, but none of the current UART modes seem suitable for this.
Is it / woul…