-
I'd like to use the USB-C port for USB host services (keyboard, MIDI, etc). It doesn't seem to be providing any voltage across VBUS and GND when a USB-C cable itself is not giving it VBUS. For example…
-
I'm attempting to use a Waveshare RP2040-Zero with hid-remapper and wanted to double check the pin outs when using it with hid-remapper as when I connect anything to my RP2040-Zero I don't see anythin…
-
Hey,
i have tried to setup the Vbus custom component in my Hass but it keeps mentioning the Following. Im not getting any data out of the vbus, the entities are just showing "Unknown" and nothing …
-
I'm thinking about creating a solar charger case.
I created two different cases for the Samsung Galaxy Note 1 and one for the Samsung Galaxy 2. For that I basically took 8x0.5V solar cells (first case…
Aypac updated
7 years ago
-
The PMID pin of the BQ25895M chip provides the boosted output providing the OTG pin is high and Vbus is disconnected.
So with an input at the usb port the device will provide power management to us…
-
**Describe the bug**
I have a Chinese somewhat generic power supply that looks like an "updated PinePower Desktop": it has two USB-A and three USB-C. The last USB-C port supports PD3.1 140 W
With …
-
Hello FatBeard,
I am now trying for days to get it working on my system without any succes.
For the VBUS to RS485 im awaiting a few components but i want to have it connected to my nodeMCU and sen…
-
When booting SOO, the system sometimes blocks after the vbus_vbstore_init: done message.
Here is the full output:
```
34817866 bytes read in 2570 ms (12.9 MiB/s)
## Loading kernel from FIT Im…
-
I'm only getting 1.3V when I check the voltage of the ground and 5V pin. I'm attempting to power and read a 9DOF BNO055 IMU with the M5NanoC6, but on both boards, when I check the outut voltage it rem…
-
### Description
Re Disconnection/Interruption to VBUS/SENSE when OT is in Deep Sleep
(Imperfection rather than fault)
In the event that aon_wake has control of the pull ups and VBUS/SENSE is re…