-
I am experiencing a problem in that the X and Y motion
on my Vevor 3018 engraver only moves at a very slow speed in jogging mode, and when in the run mode, the spindle only moves about 3mm in each d…
-
Here's something very, very weird that I've been struggling with for the past 10 hours or so. lprint seems to be very finicky about the system hostname settings.
Here's what I have:
My home offi…
-
### The problem
Tera EV Charger is unsupported
### What version of Home Assistant Core has the issue?
core-2024.5.3
### What was the last working version of Home Assistant Core?
_No response_
#…
3ldcm updated
3 weeks ago
-
### Is your feature request related to a problem? Please describe.
Hi,
ist es möglich den eSmart3 zu integrieren ?
### Describe the solution you'd like
Dieser läuft glaube ich bei recht vielen als…
-
# Log Message
Device matches None with quality of 0%. DPS: {"updated_at": 1710885485.876341, "1": 0, "3": "charger_free", "4": 8, "9": 0, "10": 0, "13": "controlpi_12v", "14": "charge_now", "…
-
I have a Calortrans CT-60, which has a bit of weird axis layout (X and Y swapped, origin is bottom *right*, with everything in positive space, see below for an image). Trying to fix this, I noticed so…
-
Hope you are well .
I have the issue connecting xpro V5 with vfd hy02d223b .
Have separated RS cable from rest of the cables to avoid interference .
Spindle can be controlled manually but not vi…
-
I have been able to successfully get my cutter to cut designs. However, it always stops before the design is finished. It cuts something like 90% of the design and then stops dead. There is no error m…
-
How can I add a micro switch that will stop the stepper motor, after the distance I choose ?
-
### Description
Hi,
I've some issues with my controller and noticed that the software doesn't provide any user feedback when the controller disconnects. For some reason my controller keeps recon…
agowa updated
2 months ago