-
Hello. Just got my new Tang Primer 20K, verified it is working with Gowin programmer on windows. Unfortunately with openFpgaLoader I am facing an issue consistently. The flashing is stopping at ~48% a…
-
Hello there.
I have purchased GBS8200 and started modding it with the instructions of the GBS-Control. The board I purchaced seem to be [V5.2 (2022 05 28)](https://uuksu.fi/other/gbs-control/2.jpg)…
-
Fred Grey's Shadowfire sounds very off, I noticed that playing 1001 Crew Cracktro https://youtu.be/p6j-hlA6Wl4?si=b_qNcOlxAsH63q1a
It sounds the same through PSID.
Frankie Goes To Hollywood fro…
-
On my micro8088, with v1.0 of the 8088_bios, right before OS load, there's a moment in the startup where the keyboard_clock line goes dead and never recovers. Rolling back to v0.95, this problem does …
-
Hi there, I see this is very active in responses and don’t know where else to post my question so here’s hoping:
I have installed and am running your examples very successfully, but I’ve run into …
-
Hi, I've built this with an LK7600 which is a clone of a GBS board and uses the same hardware, but it lacks the program jumper of the original GBS8200. What exactly do I need to ground to disable the …
-
This may be a preemptive post. But I am making some significant headway on the Samsung LTI400HN01 model. I found a supplier on alibaba for the screen and controller. I will be ordering the LVDS contro…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.0-beta.3-48-g396aaef964-dirty on 2024-07-01; Adafruit QT Py ESP32C3 with ESP32-C3FN4
Adafruit CircuitPython 9.1.0-beta.3-49-gf7745107…
-
I would like to power the SIM800C AXP192 through the back board connector. Unfortunatly, it doesn't work : the baord starts and turn off after a few seconds. I tried to press the reset button without …
-
When building para-para on headless nano platform, am required to install/build prerequisites, as per Readme. Three typos/problems :
- missing "z" at end of "tar -zxvf libevent-2.0.18-stable.tar.g"…