-
![image](https://user-images.githubusercontent.com/22411214/39084895-f21150e8-45b6-11e8-8778-81c8b369250c.png)
I implement the circuit above.
* Voltage-Controlled Switch Example
sw 0 …
-
Place a battery charger in series with the control voltage supply and the returns. This will allow the battery to charge off of the current flow of the returned control voltage.
-
### Describe the bug
I’m facing sporadic disconnect issues after a while (sometimes one hour, sometimes a day or a bit more). Venus OS doesn’t recognize the disconnect as values don’t get updated. Af…
-
I referred to the I2C-related example in your sample code and wrote an I2C API.
However, when I tested sending commands continuously, it got stuck after the first command (after setting the STA for t…
-
I want to just lay out the foundation for a possible improvement, and also get feedback to verify the idea.
### Issue
Lemma 1
Current is proportional to forward torque but only when its vector i…
-
CCL defined by BMS or in DVCC should actually assure battery health.
Such definitions are not properly instructed to Multiplus's and MPPTs.
When CCL is set to 0 by BMS MPPTs continue charinging unti…
-
Slowly making replacements for the Qucs Verilog-A Library devices.
1) Modded VCR.sch to get rid of divide by zero if Vin=0 volts. What actual VCR is chosen is TBD.
2) A new mod-amp was created usi…
-
![HSTNS-PF43](https://github.com/user-attachments/assets/22bfc3c0-90e5-4880-80cf-714ce764f5a8)
Added a change to OVP and Vout.
Now I'm looking for a solution to control the output current!
-
This issue can be used to track the list of missing PSAT models:
### Loads
- [x] Thermostatically Controlled Load
### Machines
- [ ] Synchronous Machine order V, Type 3
- [ ] Synchronou…
-
What need to happen:
- [x] Figure out the meeth
- [ ] Control side at the node with higher rated voltage
- [ ] Tap side and the control side at the same side