-
### Category
Other
### Hardware
Rak4631
### Firmware Version
2.0.14 and 2.0.17
### Description
Rak 4631 (both on 5005 and 19007 baseboards) with ethernet and MQTT crashes after a …
-
[RAKwireless](https://www.rakwireless.com/en-us) is known for our LoRaWAN Gateways (and Helium hotspots). Now we have just released our first CM4-based gateway, the RAK7391 WisGate Connect. It has bee…
-
Hi Dana,
After a long break, I just updated STM32CubeIDE t0 the latest and the WL SDK firmware to 1.3. Well I broke all the rules and made too many changes at once :-) I built your code "as is" a…
-
Hi dev team
I build an air quality node base in RAKWireless Wisblock modules. The serial output is as follows:
[RAK_Output.pdf](https://github.com/Sensirion/arduino-ble-gadget/files/10047625/RAK_Out…
-
When I run the example code from [RAK13006_CAN_Master.ino](https://github.com/RAKWireless/RAK13006-MCP2518/blob/main/examples/RAK13006_CAN_Master/RAK13006_CAN_Master.ino) it
- sends 48 frames success…
-
### Platform
ESP32
### Description
Talking about a solar powered system charging a Li-Ion battery, operating 24/7/365:
For the maximization of the battery live time it would be useful not to charg…
-
### Platform
NRF52, ESP32
### Description
Please add the ability to mirror the heartbeat "blinking" signals to any user-configurable GPIO pin.
This feature is required to efficiently integrate "ha…
-
Hi! This is incredible work and I'm in the process of integrating it to a larger RAK WisBlock based project. I am curious about where you found the settings commands documented. Also if you had writte…
-
Hi I dont get the values from the sensors.
I only get the following attributes:
{
"LORA_DATARATE": "SF7BW125",
"LORA_RSSI": -60,
"LORA_SNR": 10
}
what did I wrong?
-
Hi I was trying this code and following all the doc I ran into a break in the code the moment before I print the axis data, I am left with "check acc" in the console and it all jams and the console fr…