-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
I have a 7x7 Mesh Grid size in my custom configuration.h for UBL. I attached the complete zip.
…
Abasz updated
7 months ago
-
Hi . I wired everything like shown up but get TMC Connection Error in Display. Checked via Pronter 3 TMC2008 get a Connection But the 4. Has bad Response All to low. Can sw Help pls . I used BT…
-
I have a Mega M with a Trigorilla V1.1 Board (+ Blue/White Display, two endstops on Z-Axis) and i have problems to access the SD-Card with Firmware V 1.5.0-b3. As long the SD card is removed, i can ac…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Are you looking for hardware support?
_No response_
### Describe the feature you want
### Input Shap…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
When downloading the source code and using the output from your configurator tool, I get the bel…
-
### Bug Description
printer fails to send M155 temperature report after ~72 Minutes of printing.
additionally, the DWIN screen freezes.
when re-enabling temperature report using M115, the repo…
-
Hello,
I would like to know, Do you have any function to access DWIN HMI SD card from ESP 32.
Thanks and regards
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
after the recent commit
https://github.com/MarlinFirmware/Marlin/commit/8fa6a4da2eebc1dbe1…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have Biqu B1 SE with SKR 2 + TFT SPI screen. On latest Marlin [[cron] Bump distribution dat…
-
Hi there i am new to all this programming stuff i have a mks sgen v1 with tmc2209 on x, y, z, e1, axis and lv8729 on e0 i am trying to get sensor less homeing to work and dual z motors z, e1
i am…