-
With a DUE I try to connect a MMA8452 but get wrong answers. On scope I can see that the parameter "sendStop" in "uint8_t TwoWire::endTransmission(uint8_t sendStop)" has no effect - instead of a resta…
-
Hello, I've used this library before and remember having to chase down the connections to the 'two wire' interface. It would be nice if you put the actual pin numbers in the source, as the phrase "Th…
-
Maybe related to I2Cdev library or something in the library, or I have the wrong library - I think it's a library issue, but it's a bit beyond me.
`
Arduino: 1.6.9 (Linux), Board: "NodeMCU 1.0 (ES…
-
Currently the output is not ranging a wide range of temperatures, however the MLX90614 datasheet mentions that it actually does sense temperatures between -70 to 382.2 °C.
So there could be two proble…
-
```
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-app-shadowsocksR:
* kmod-ipv6 *
* opkg_install_cmd: Cannot install package luci-app-shadow…
-
When using an I2C device with the bus speed set to 'Standard' mode, the bus speed used by the Lightning provider is too fast and exceeds the 100KHz maximum, resulting in data corruption.
I create my …
-
Hello
I have a question.
Pixhawk support some sonar sensor. But I want to use MLX90614(temperature sensors) using I2C.
Is this possible connection?
If you know way to connect please tell me some…
-
ESP8266 with 1v85 latest pull
testing with some i2c devices and using a scanner function publish on the forum [i2cdetect](http://forum.espruino.com/conversations/278556/)
I2C.readFrom(address, quant…
-
```
root@LEDE:~# nsjail -Ml --port 9000 --chroot /chroot/ --user 99999 --group 99999 -- /bin/sh -i
[2017-10-15T10:02:43+0000] Mode: LISTEN_TCP
[2017-10-15T10:02:43+0000] Jail parameters: hostname:'…
ebadi updated
6 years ago
-
Line 72 is referencing a non-existent method (rawWrite):
``` c
errors += i2c.rawWrite(command);
```
Changing it to:
``` c
errors += i2c.write(command);
```
seems to have solved the issue.