-
Can I tell pylontech.py to use e.g. ttyUSB11 instead of ttyUSB0? Everything is working fine except my USB devices (I have multiple) are differently enumerated...
df8oe updated
2 years ago
-
Enabling MQTT cause the system restart when touching the screen.
Disabling MQTT, no problem with the touchscreen.
-
Hi there,
I just got a Growatt Inverter and successfully setup the WIFI module so I can review all data in server.growatt.com.
I also could successfully login and pair my inverter into Homey. Howe…
-
Hi great project but still need an extra piece of hw. But easier than installing sw in cerbo,...
I will try to test and support as well.
I had ask an dealer of ant directly and they are allowed to…
-
Salve,
mi chiamo Matteo, sono un programmatore e devo farti i complimenti per il lavoro che stai facendo.
Possiedo un inverter ATON e stavo cercando un modo per intergrare le informazioni dentro …
-
Hi There
i have HA installed on a Raspberry Pi 4. I purchased this USB to RS485 and its connected to RS485 on my Sunsynk 8KW Inverter
https://www.robotics.org.za/index.php?route=product/product&pr…
-
I can't see any value in the available sensors for my Solis inverter on the Solis Cloud that indicates the rate at which the battery is charging or discharging.
I can see the inverter_battery_power…
-
1. DONE ~(guy) update Victron & Pylontech that per v2.80, DVCC is force enabled. See https://github.com/victronenergy/venus/issues/784.~
2. DONE ~update GX documentation (manual, but also datashee…
-
**Describe the bug**
I m getting: unrecognized Solis inverter type - serial number : unknown and Solis: reading serial number from address 0x80ec failed; other address may succeed
I m using a DSD …
-
When using CCL/DCL from https://github.com/Louisvdw/dbus-serialbattery/pull/293 with mode "WaldemarFech" the code correctly sets the charge current limitation (CCL) to zero, if the highest cell voltag…