-
Last Thursday (2023-02-16) I had an SG5.0RS installed, replacing an older inverter from a different vendor.
This is my first Sungrow. I've been trying to follow your README but I'm stuck.
I'm fi…
-
I have some errors in my logs of my SH8.0RT:
Logger: pymodbus.logging
Source: components/modbus/modbus.py:398
First occurred: 13:24:57 (826 occurrences)
Last logged: 13:40:05
General exceptio…
-
Hello! Is ist possible to integrate a 2nd inverter? I have two (Sungrow SH10RT), each with a battery. Actually your project works fine, but i see only values from one inverter...
Thanks!!
-
### The problem
After core update to 2024.4.1 Modbus fails to read data fom any register.
### What version of Home Assistant Core has the issue?
2024.4.1
### What was the last working version of H…
-
I would love to have a way to debug my system by setting or reading any register.
Also this would (possibly?) allow us to totally ditch the iSolarCloud and fully set up the inverter locally.
For e…
-
Greetings
I have a Sungrow Device Model: SG5K-D with a Wifi V31 dongle on it. When trying the test.py, I get this error.
ERROR:UPSUPPORT INVERTER: Supported inverter device_type_code [294] is …
-
I'm trying to make your integration working with my Sungrow SH6.0RS Hybrid Inverter but all the sensors return a "Not available" warning and I can't get the read values. I checked all the parameters (…
-
Hi. All my containers appear to be running fine when deployed, with the exception of the Sungather container, which outputs the following log data:
> 023-04-05 11:52:27 INFO Starting SunGather …
-
I was playing with inverter modes, tried force charge and force discharge. I see there are two issues.
1. SOC is stuck at 100%, even after several hours of discharge. Weirdly, physical battery SOC b…
-
### Overview
Disable home battery discharge during fast mode/planner charging. The intention is to prevent home battery draining while a car is charging. The use case arises either during winter, or …