-
Hi,
1. In your implementation or as the standard says we are transmitting different pilot sequence for each symbol. Why we cannot use just a single pilot sequence for all the symbols. Say we select…
sayaz updated
4 years ago
-
Sometimes the digital receiver for BPSK and 2FSK will stop working correctly after switching between operating modes, despite having a good signal. Workaround: select operating mode before starting **…
-
I install AFF3CT by following instructions:
```
git clone --recursive https://github.com/aff3ct/aff3ct.git
mkdir aff3ct/build
cd aff3ct/build
cmake .. -DCMAKE_BUILD_TYPE="Release"
make -j4
```
…
-
The original code of the despreader was completely non-functional because the internal samples per symbol value was never set. #2 pull request fixes this issue, removes existing example and adds a mor…
-
As I don't know if you're already aware of it, I mention it here.
In flight mode this is spammed to the log:
Alternately
```
[Kerbalism] -> verbose: CommInfo.Init - Kerbalism: CommInfo handle…
-
echo 0x1C117 | sudo tee > /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/stations/dc:fe:18:64:fc:94/rate_scale_table
but it shows : bash: /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/stations…
-
What wrong in my config?
I have read the out:
"you are missing required dependencies to run openwebrx. please check that the following core requirements are installed:
csdr, nmux, nc"
But i ha…
-
I am interested in using the DVB-RCS2 turbo code from the library form of Aff3ct. I've got the encoder working but I'm having some issues with the decoder.
Figuring that I've done something wrong …
-
@dpward @dhalperi my AP Ntx=2, my pc Nrx=3, but I get CSI includes 1*3*30 and 2*3*30. I ping 2500/s in my pc. I wnt to get 2*3*30 CSI , how can I do ?
-
Hello,
Cool tool, I am trying to get it up and running, this is the error it throws, only change made was I set the default to the hackrf instead of the usrp.
```
Traceback (most recent call …