-
### Version
Version 2.3.55.5
### Operating system type + version
Windows 10 19042.870
### 3D printer brand / version + firmware version (if known)
Creality CR6-SE with the most current klippe…
-
### Description
I have confirmed by testing that CF6 Final does not prevent users from specifying nozzle temperatures higher than MAXTEMP-HOTEND_OVERSHOOT.
I can not test whether it protects aga…
-
### Description
When doing a filament load / unload the printer does move the z-axis up/down.
As the menu item was used in a not-printing-situation, I was wondering what that's good for. Whilst p…
-
qiling code
```
from qiling import *
def my_sandbox(path, rootfs):
ql = Qiling(path, rootfs)
ql.run()
if __name__ == "__main__":
my_sandbox(["test/KMDFDriver6.sys"], "rootfs/x86…
-
### Description
Pressing _Cancel_ during use of _Validation Pattern_ does not fully cancel print, circle outlines continue to print.
### Steps to Reproduce
1. Press _Run validation pattern_…
-
### Description
While doing e-steps calibration, I've accepted the default of 210°C / 100mm and everything was ok.
Since I was trying to find out if my extruding was skipping at lower temps, I dec…
-
The standby feature once the machine has been turn off and back on again even during print screen stays completely lit. To reactivate the feature the standby feature must be toggled off then back on f…
-
**First of all I want to thank everyone for the support and positive reactions we got on the 5 beta release of the community firmware. All the testing and feedback has made this firmware better and be…
-
Hello,
today I've installed the btt skr cr6 Mainboard and flashed both (mb and stock display) with the Marlin-2.0.7.3-cr6-community-release-5-beta firmware.
Now I have the problem that the printe…
-
### Description
After upgrading firmware to Release 5 successfully (was able to home, level bed and print normally), rolling back to any Creality firmware version or Release 3 (As advised in Release …