-
```
OLA is the open lighting architecture. It's a mature client/server based
lighting system, mainly for use with DMX lighting fixtures. You will find OLA
at http://code.google.com/p/linux-lighting…
-
```
OLA is the open lighting architecture. It's a mature client/server based
lighting system, mainly for use with DMX lighting fixtures. You will find OLA
at http://code.google.com/p/linux-lighting…
-
```
OLA is the open lighting architecture. It's a mature client/server based
lighting system, mainly for use with DMX lighting fixtures. You will find OLA
at http://code.google.com/p/linux-lighting…
-
```
OLA is the open lighting architecture. It's a mature client/server based
lighting system, mainly for use with DMX lighting fixtures. You will find OLA
at http://code.google.com/p/linux-lighting…
-
_From [steevech...@gmail.com](https://code.google.com/u/113219999481684446340/) on December 10, 2013 11:27:29_
steps to reproduce the problem:
1. Install ola on ubuntu 12.04 LTS with http://www.opend…
-
Hi Massimo, hi everybody,
I'm trying to re-sync to the latest qlcplus git after updating my laptop, and I've been running into a number of build issues.
System is openSUSE tumbleweed of 2015-01-15, i…
-
Version: v0.2.0-203-gd0bef38
No output on the Enttec open dmx dongle. For Enttec dongle, RTS line must be set to high (=reset flag in SW)
ihbar updated
10 years ago
-
Hi
This is an issue only for stage branch, not for released version.
I have tried to test the enttec open dmx interface today with stage, and I got some trouble with the upload menus.
SD with new env…
ihbar updated
10 years ago
-
Hello,
I'm trying to install OLA on Archlinux on Raspberry Pi ( I don't want to use Raspbian because of many reasons) and I can't use my open source clone of Enttec Open DMX USB relying on FTDI chip,…
-
Hi,
I have an USB->DMX Cable that works with Erwin Roll's DMX driver (/dev/dmx0).
I'm trying to avoid using the DMX driver to use the vanilla serial port, from /dev/ttyUSB0.
So I'm trying to use yo…