-
## Current Behavior
Airspeed not available in OpenTX telemetry page - using TBS crossfire protocol and MATEK F765 Wing with digital Airspeed sensor. Airspeed available in OSD (so the sensor and FC ha…
MrMap updated
4 months ago
-
Hi,
Is it possible to add PPM or S.BUS input support for TX module? Im thinking to use it as a 2.4G -> 900M converter from other TX.
-
## Current Behavior
With Radiomaster RP4TD bound to Radiomaster Ranger Micro there is no "other devices" folder in the lua and therefore no way to change Rx settings from the lua.
## Steps to …
-
## Current Behavior
When I try to change band with VTX admin to R, vtx changes to E, and if i try to set band F via vtx admin, it changes to R. Also power changes do not work at all, as well as pit…
-
### Minimum requirements
- [X] Core clock speed is 48 MHz or faster?
- [X] Is the CPU an ARM Cortex M0+ or later?
- [X] Is the host microcontroller's UART peripheral able to support 420,000 (or highe…
-
## Overview
Over time, I am adding full telemetry support as modules based on the types of telemetry being added. These are:
- [x] Attitude
- [x] Barometric Altitude
- [x] Battery
- [ ] Fligh…
-
I'm trying to flash 3.2.0 to my TX16S V2 with ELRS and it won't flash the repartitioner. I get the alert: Not enough data uploaded even though I press "flash anyway"
-
## Current Behavior
Current elrs LUA script would crash on entering devices menu, except the radio menu, and elrs rx menu.
Some FC firmware provides useful tuning options in the device menu exposed…
-
## Current Behavior
I have build a diy e28 tx module, it works on my futaba T10J, but i have noticed the unexpected channel 9 on betaflight receiver tab.
## Steps to Reproduce
1. Attach DIY E…
-
@olliw42 have been trying to a system setup...flashed R9M TX module with ELRS bootloader and then mLRS,no problem.....flashed via TX the R9MX with ELRS bootloader, no problem....but cant seem to talk …