-
hi,
I have some questions:
**-is there a schematic for wemos d1 mini?**
A fritzing schematic style would the best.
I can only find a schematic for a total diy 8266 solution.
I would like one ws28…
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on October 22, 2012 09:49:08_
DRC seems to be using the part both on the board side and on the copper side. True of any pa…
-
I have questions about how to connect the sources to the esp32 of the controller and the ve.direct. If you could help me by answering the following questions, I need it urgently.
How to connect the e…
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on June 06, 2012 06:20:12_
What steps will reproduce the problem? 1. 2. 3. Attach your sketch file and/or custom part file…
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on October 15, 2010 06:02:20_
What steps will reproduce the problem? 1. 2. 3. What is the expected output? What do you see…
-
There is a generic voltage source screw terminal icon if you wan to use that.
-
The markings for the generic and the 10mm LEDs in Fritzing differ. They don't have a datasheet attached that could be followed.
Therefore, I think they should at least use the same marking system.
A…
-
Hi, I wanted to run your project on my Raspberry pi 3 (OS: Linux mute 4.9.26v7-aufs #1 SMP Tue May 9 20:14:03 CEST 2017 armv7l armv7l armv7l GNU/Linux) with Swift 3.1 and Vapor 2.0.
But when try to a…
-
## Problem
The documents folder might move, or the user might want to have the documents folder at a different location. Fritzing does not deal well with this.
See for example #3420
## Proposed …
-
find solution for the servos with the condenser //insert schematics